The necessary regular maintenance of peristaltic pump in the process of use is an effective way to improve the working efficiency and service life of the peristaltic pump. Because the main parts of the peristaltic pump do not need to be considered too much, only simple daily lubrication maintenance is needed:

1. The roller should be oiled regularly to keep the roller in a good lubrication state. Note: The tightness of the roller should be checked when the oil is injected. If the roller is found to be too loose, tighten it with the tip pliers. If the roller is found to be loose and cannot be eliminated after adjusting the tightness, then the wear condition of the inner bearing of the roller should be tested twice, and it can be removed to replace the bearing or the roller.

2. The roller bearing should be greased every six months or so.

3. After the new reducer runs for a period of time, the oil in the tank is discharged and 30# oil is added again. We only know that peristaltic pumps have low maintenance costs, but we don't know where. Only the enterprise that has used the peristaltic pump will know how much the peristaltic pump saves for its use cost.

Other pump classes for transmission media maintenance and repair time needs five or six hours, here is not to say what kind of pump class, I believe that used friends understand. The peristaltic pump only needs to replace the pump tube to complete the maintenance work. It also needs to be moved, transferred and reinstalled during maintenance, which takes up additional time. This has a great impact on our work efficiency. So you can think of how convenient the replacement of the pump pipe is. And we can transfer the liquid, choose different prices of the pump pipe.