Many users, are just beginning to contact the peristaltic pump this product, do not know how to choose their own model. In response to this problem, Purui Fluid has made a summary for you, which can help you choose the model suitable for your own, the specific matters are as follows:
1, clear purpose first to know what you buy peristaltic pump is used to do, such as how much flow is required, what is the nature of the liquid (ph value, etc.), the requirements for accuracy and so on. Only clear what you want, in order to better choose the product, otherwise they do not understand what they need, the choice is certainly difficult.
2, the difference between different models of peristaltic pump is a large series, between different series, mode of operation, flow accuracy and so on are different. The peristaltic pump commonly used by Purui fluid can be divided into speed regulation type, flow type and distribution type, and each model can be matched with different pump heads to achieve different flow rates, the specific collocation can be viewed in the product details page, or consult Purui fluid sales staff.
3, the working environment this is an easy to ignore the problem, because there is a motor inside the pump drive, if the humidity in the air is too large, exceeding the specified range of values, easy to cause pump operation failure. Or work directly outside, without protective measures, rain into the drive, there will be certain problems.
4, ask more Some users with a certain experience, often make their own choices, but it is still recommended that you can consult the fluid sales staff. After all, in terms of experience and professionalism, they still know more, and if there are more suitable new products, they can also recommend them to you, so as to save some costs.
Precautions for use
1, when using the pressure pipe, be careful not to press the hose too dead, so as not to cause excessive wear of the hose.
2, pump pipe inlet as short as possible, peristaltic pump pipe joint and diameter shall not be less than the diameter of the pipe stuck by peristaltic pump head
3, constant flow pump in the use of the process, to timely care of the wear of the road, to be replaced in time, so as not to cause liquid leakage.
4, pay attention to the working environment, is at room temperature or corrosive environment, the material of the pump shell should be changed in time
The above is how to choose the peristaltic pump all content, if there are any other peristaltic pump questions, you can call to consult Purui Fluid.