Welcome to PreFluid Technology Co., Ltd.

 |  EN

PreFluid

+86 13861019936 Contact US
Location: Home » News Center » Company News

Contact us

  • No. 8, Fuqiang Road, Xinbei District, Changzhou City, Jiangsu Province
  • pump@prefluid.com
  • +86 13861019936

Maintenance of peristaltic pump

Release date:Aug 21, 2023 Source:PreFluid Pageviews:-
Nowadays, with the increasing popularity of peristaltic pumps, their use has promoted the development of various related industries
Nowadays, with the increasing popularity of peristaltic pumps, their use has promoted the development of various related industries, brought more convenience to some enterprises that need fluid work, improved work efficiency, and gradually become the main use equipment for fluid operations today. At the same time, it also brings many new problems, such as daily maintenance and maintenance. The following Purui fluid on the maintenance of peristaltic pump points:

Peristaltic pump common maintenance methods:

1, check whether the peristaltic pump each pipeline is smooth, whether the hose joint is loose, manually rotate the pump head and roller, whether it is flexible.
2, the peristaltic pump drive power, check whether the motor is running normally, and test whether the inlet and outlet pressure of the peristaltic pump meet the requirements after normal operation
3. Set the head and flow of the peristaltic pump to ensure that it operates within the best range in order to obtain its operating state.
4, in the work of peristaltic pump, the maximum temperature of the bearing shall not exceed 80 ° C, and ensure that the temperature of the creep bearing shall not exceed 35 ° C than the maximum ambient temperature.
5, in the working process of the peristaltic pump, if the peristaltic pump is found to have abnormal sounds, the peristaltic pump should be turned off immediately for inspection.
6, daily maintenance should be timely, the new pump should be used for a month after the replacement of lubricating oil every 100 hours, peristaltic pump in the first months of work, every 100 hours to replace the lubricating oil, after every 500 hours, replace once.
7. Check the pump head press block regularly. If the upper press block is found to be rough and uneven, the pump head press block should be replaced immediately to avoid greater wear on the hose leading to reduced hose life.
8, if the peristaltic pump is not used for a long time, then it is necessary to disassemble the peristaltic pump head, dry the other liquids in the pump body, fully fill the lubricating oil in the connection of the pump head and the drive, the motor bearing and the relevant connection parts, and then store it safely in the normal temperature environment.

The above is some content of peristaltic pump maintenance, I hope to help you, if you also want to understand peristaltic pump selection, you can browse "how to choose peristaltic pump".
【Tag of this article】:Maintenance of peristaltic pump
【Editor】:PreFluidall rights reserved:https://www.prefluid.netPlease indicate the source

Related News

Gas peristaltic pump

Gas peristaltic pump

Gas peristaltic pump is a device capable of transporting gas to high or low pressure environments. It uses the principle...

Apr 10, 2023 Read Details
Peristaltic pump flow and calculation

Peristaltic pump flow and calculation

How to calculate the flow rate of peristaltic pump? Peristaltic pump head can assemble multiple pump pipe, each differen...

Oct 31, 2022 Read Details
How to reduce the pulse during peristaltic pump delivery

How to reduce the pulse during peristaltic pump delivery

After the fluid enters the peristaltic pump head, it is stored between two rollers to form a "fluid pillow". This was fo...

Oct 07, 2023 Read Details

Contact

  • Telephone: +86 13861019936
  • E-mai: pump@prefluid.com
  • Address:No. 8, Fuqiang Road, Xinbei District,
  • Changzhou City, Jiangsu Province

facebook Twitter linkedin youtube

Leave a Message

Copyright ©Changzhou PreFluid Technology Co., Ltd.. All rights reserved. ICP备案:苏ICP备12035203号-1 Privacy statementTerms & conditions Sitemap